友情提示:
本產品 (型號 X7/XS/XF/全新X1 產品可以使用) 出廠已經自帶大部分車型的用戶自定義的數據, 請進入 "用戶數據" 文件夾調取, 如果沒有這個文件夾則自行重新下載。
The product (Support X7/XS/XF/New X1 model) stores user-defined data of most models before leaving the factory. Please enter the 'USERPID' data folder to retrieve it. You can download it separately if this floder dose not exist.
本自定義數據源支持更多的車輛以及更豐富的數據例如(變速箱油溫\檔位\發動機油溫\油壓\扭矩\爆震控制\電機轉速\電流\電量等等.)
請對應車型自行下載并探索調用數據測試是否可以支持。
Friendly tips:
This custom data source supports more vehicles and more abundant data, such as (transmission oil temperature \ gear \ engine oil temperature \ oil pressure \ Torque \ knock control \ motor speed \ current \ electric quantity, etc.)
Please download the corresponding model and explore whether the call data test can be supported.
1:請先確保機器的版本 (X7為2.13及以上,XS為2.10及以上XF為2.01及以上版本,全新X1為2.14及以上版本)。
1: Please make sure that the version. XS model is 2.10 or above, Xs model is 2.10 or above, XF model is 2.01 or above, New X1 model is 2.14 or above.
2: 將下載的資料壓縮包解壓縮后復制到儀表的存儲內存中并記住存放位置(支持任意目錄存放)，如有相同文件則覆蓋之前文件。
2: Downloaded the following files unzip the package and copy it to the storage memory of the instrument and remember the storage location (support any file directory). If there are the same files, the previous files will be overwritten.
3: 進入 "用戶數據設置"->"數據顯示及PID指令1~XX"->"配置名稱及地址" 選擇自己需要的用戶數據 (調取自己存放的文件)。
3: Enter "USER DATA SETUP"->"DATA AND PID1-XX"->"FILE LOCATION" to select the user data you need.
4: 進入 "顯示設置"->"儀表類型選擇" 選擇自己需要的用戶數據即可顯示。
4: Enter "DISPLAY SETUP" - > "ITEM SETUP" to select the user data you need.
USB數據接口的產品的客戶請注意(Attention):
1.請先斷開OBD電源再進行數據處理。(Please disconnect OBD wire when update).
2:連接電腦后只提示 USB已斷開 請根據升級提示3處理。
(After connecting to the computer, only prompt USB DISCONNECT will be displayed. Please follow the upgrade attention 3.)
3.請使用質量可靠的USB數據線而不是只有充電功能的電源線連接電腦方可處理數據內容。(Please use a reliable USB data cable instead of a power cable with only charging function to connect to the computer to process data.)
自定義文件的使用建議：
請帶文件夾名稱解壓縮到機器的存儲器, 記住存放位置(支持任意目錄存放)，如有相同文件則覆蓋之前文件。
User files usage suggestion:
Please unpack the files with the folder name to the machine memory device. Remember the storage location (support any file directory). If there are the same files, the previous files will be overwritten.
Download點擊下載 Standard OBDII 標準協議
